Washing forceps
- Gross, 200 mm, 8", 30.00
- Gross, 200 mm, 8", curved, 31.00
- Ulrich, 220 mm, 8 3/4", 33.00
- Ulrich, 220 mm, 8 3/4", curved, 34.00
- Ulrich, 255 mm, 10", 36.00
- Ulrich, 255 mm, 10", curved, 37.00
- Ulrich, 270 mm, 10 3/4", 40.00
- Ulrich, 270 mm, 10 3/4", curved, 42.00
- Ulrich, 305 mm, 12", 45.00
Wire bending pliers
- Standard, for wires up to 1.8 mm, 306.00
Wire cutting forceps
- Harvey (TC), 235 mm, 9 1/4", for wire up to 3 mm (soft) or 2.2 mm (hard), 206.00
- Reill (TC), 175 mm, 7", for wire up to 2 mm (soft) or 1.6 mm (hard), 284.00
- Standard (TC), 145 mm, 5 3/4", for wire up to 2 mm (soft) or 1.5 mm (hard), 84.00
- Standard (TC), 180 mm, 7", for wire up to 2 mm (soft) or 1.5 mm (hard), 241.00
- Standard (TC), 170 mm, 6 3/4", for wire (up to 0.9 mm soft) removal after sternum suture, 292.00
- Standard (TC), 220 mm, 8 3/4", or wire up to 3.5 mm (soft) or 2.5 mm (hard), 148.00
- Standard (TC), 235 mm, 9 1/4", or wire up to 3 mm (soft) or 2.2 mm (hard), 186.00
Wire cutting pliers
- Standard, up to 3 mm, 220.00
- Standard, up to 6 mm, 360.00
Wire cutting scissors
- Beebee, 105 mm, 4 1/8", 17.00
- Beebee, 105 mm, 4 1/8", curved, 18.00
- Harvey, 125 mm, 5", blades toothed, 25.00
- Standard (TC), 120 mm, 4 3/4", 1 blade toothed, 79.00
Wire guides
- Demel, 275 mm, 11", 61.00
- Demel, 285 mm, 11 1/4", 65.00
- Demel, 305 mm, 12", 69.00
- Standard, 225 mm, 9", 56.00
- Standard, 240 mm, 9 1/2", 58.00
- Standard, 270 mm, 10 3/4", 60.00
Wire holding forceps
- Standard (TC), 170 mm, 6 3/4", 149.00
Wire saws
- Gigli, fine, 300 mm, 12", 5 pieces 32.00
- Gigli, fine, 400 mm, 16", 5 pieces 32.00
- Gigli, fine, 500 mm, 20", 5 pieces 34.00
- Gigli, coarse, 500 mm, 20", 5 pieces 34.00
- Gigli, handle for wire saws, 17.00
- Olivecrona, 300 mm, 12", 5 pieces 32.00
- Olivecrona, 400 mm, 16", 5 pieces, 32.00
- Olivecrona, 500 mm, 20", 5 pieces, 34.00
- Olivecrona, 700 mm, 28", 5 pieces, 34.00
Wire suture needles
- Jonesco, 185 mm, 7 1/4", 98.00
Wire tightening forceps
- Baumgartner (TC), 200 mm, 8", coarse profile (0.5 mm), 75.00
- Demel, 270 mm, 10 3/4", 149.00
- Standard (TC), 175 mm, 7", coarse profile (0.5 mm), 78.00
Wire tightening pliers
- Standard (TC), 150 mm, 6", round tip, coarse profile (0.5 mm), 63.00
- Standard (TC), 150 mm, 6", trapezoid tip, coarse profile (0.5 mm), 65.00
Wound retractors
- Adson-Baby, 140 mm, 5 1/2", 3x4 teeth, semi sharp, flexible joint, 171.00
- Allport, 95 mm, 3 3/4", 4x4 teeth, 84.00
- Alm, 70 mm, 2 3/4", 4x4 teeth, 48.00
- Alm, 100 mm, 4", 4x4 teeth, 52.00
- Bose, 60 mm, 2 3/8", 11.00
- Cairns, 145 mm, 5 3/4", 3x3 teeth, sharp, blades turnable, 165.00
- Caspar, CCR complete set, 990.00
- Cloward, complete set with pairs of blades, 560.00
- Fat-Retractor, 45 mm, 1 3/4", 38.00
- Fat-Retractor, 55 mm, 2 1/8", 38.00
- Finsen, 50 mm, 2", 2x3 teeth, 36.00
- Finsen, 70 mm, 2 3/4", 3x4 teeth, 38.00
- Finsen, 70 mm, 2 3/4", 3x4 teeth, with ratchet, 61.00
- Finsen, 75 mm, 3", 2x3 teeth, 38.00
- Henderson, 170 mm, 6 3/4", 4x4 teeth, sharp, 173.00
- Irwin, 175 mm, 7", 4x4 teeth, sharp, 174.00
- Jackson-Burrows, 185 mm, 7 1/4", blunt, 118.00
- Jansen, 100 mm, 4", 3x3 teeth, blunt, 148.00
- Jansen, 100 mm, 4", 3x3 teeth, blunt, 148.00
- Jansen, 100 mm, 4", 3x4 teeth, blunt, 154.00
- Jefferson, 140 mm, 5 1/2", gebogen, 3x4 teeth, blunt, 156.00
- Kilner, 50 mm, 2", small teeth, 29.00
- Logan, 50 mm, 2", 3x3 teeth, 76.00
- Mayo-Adams, 165 mm, 6 1/2", 2 double blades, 170.00
- Mollison, 140 mm, 5 1/2", 2x2 teeth, blunt, 146.00
- Mollison, 155 mm, 6", 4x4 teeth, blunt, 124.00
- Perkins, 130 mm, 5 1/8", 3 teeth/1 Blatt, right or left each 105.00
- Plester, 110 mm, 4 3/8", 2 teeth/1 blade right or left each 99.00
- Plester, 130 mm, 5 1/8", 2x2 teeth, sharp or blunt, each 93.00
- R.N.T.N.E. Hospital, 165 mm, 6 1/2", 3x4 teeth, sharp, 157.00
- Scoville-Richter, complete set, 460.00
- Standard, 100 mm, 4", 4x4 teeth, blunt, 53.00
- Travers, 215 mm, 8 1/2", 167.00
- Tόbinger Modell, 165 mm, 6 1/2", 2 blades, 136.00
- Weitlaner, 110 mm, 4 3/8", 2x3 teeth, sharp, 90.00
- Weitlaner, 110 mm, 4 3/8", 2x3 teeth, semi sharp, 90.00
- Weitlaner, 110 mm, 4 3/8", 2x3 teeth, blunt, 90.00
- Weitlaner, 130 mm, 5 1/8", 3x4 teeth, sharp, 93.00
- Weitlaner, 130 mm, 5 1/8", 3x4 teeth, semi sharp, 93.00
- Weitlaner, 130 mm, 5 1/8", 3x4 teeth, blunt, 93.00
- Weitlaner, 130 mm, 5 1/8", 3x4 long teeth, sharp, 141.00
- Weitlaner, 130 mm, 5 1/8", 3x4 long teeth, blunt, 141.00
- Weitlaner, 165 mm, 6 1/2", 3x4 teeth, sharp, 99.00
- Weitlaner, 165 mm, 6 1/2", 3x4 teeth, semi sharp, 99.00
- Weitlaner, 165 mm, 6 1/2", 3x4 teeth, blunt, 99.00
- Weitlaner, 195 mm, 7 3/4", 3x4 teeth, sharp, 138.00
- Weitlaner, 195 mm, 7 3/4", 3x4 teeth, blunt, 138.00
- Weitlaner, 240 mm, 9 1/2", 3x4 teeth, sharp, 148.00
- Weitlaner, 240 mm, 9 1/2", 3x4 teeth, blunt, 148.00
- Weitlaner, 255 mm, 10", 5x6 teeth, sharp, 161.00
- Weitlaner, 255 mm, 10", 5x6 teeth, blunt, 161.00
- Wullstein, 130 mm, 5 1/8", 3x3 teeth, sharp, 89.00
- Wullstein, 130 mm, 5 1/8", 3x3 teeth, blunt, 89.00
| A | B | C | D | E | F | G | H | I | J | K | L | M |
| N | O | P | Q | R | S | T | U | V | W | X | Y | Z |