Nail drills
- Standard, complete set with 3 drill points, 77.00
Nail extracting forceps
- Standard, 135 mm, 5 1/4", 69.00
- Standard, 145 mm, 5 3/4", extrawide jaw, 91.00
Nail scissors
- Standard, 95 mm, 3 3/4", 18.00
- Standard, 95 mm, 3 3/4", curved, 19.00
Nail splitting forceps
- Standard, 135 mm, 5 1/4", 58.00
Nail splitting scissors
- Systrunk, 130 mm, 5 1/8", 38.00
Nasal knives
- Joseph, 145 mm, 5 3/4", straight or curved, 24.00
Nasal scissors
- Cottle, 165 mm, 6 1/2", flexed, 45.00
- Fomon, 145 mm, 5 3/4", blades toothed, flexed, 39.00
- Heymann, 190 mm, 7 1/2", 44.00
- Heymann-Knight, 175 mm, 7", 44.00
- Kirstein, 175 mm, 7", blades toothed, 52.00
Nasal specula
- Beckmann, 14 cm, 5 1/2", small, handle curved sideward, 73.00
- Beckmann, 15 cm, 6", handle curved sideward, 73.00
- Cottle, 14 cm, 5 1/2", short, medium, long or extra long, each 69.00
- Hartmann, 15 cm, 6", small, medium or large each 49.00
- Hartmann-Halle, 15 cm, 6", small, medium or large, each 49.00
- Killian, 160 mm, 6 1/4", short, medium, long or extra long, each 60.00
- St.Clair Thomson, short, medium, or long, each 29.00
- Thudichum (Goldsmith), 65 mm, 2 1/2", 5 sizes, each 19.00
- Vienna Pettern, 15 cm, 6", small, medium or large each 49.00
- Voltolini (Duplay), small, medium or large each 29.00
- Yankauer, 190 mm, 7 1/2", 99.00
Nasal suction tubes
- Gillies, 170 mm, 6 3/4", Ψ 3 mm, with finger cut-off and stylet, 18.00
- Kilner, 190 mm, 7 1/2", Ψ 4 mm, 27.00
- Paulsen, 175 mm, 7", button tip, Ψ 4.5 mm or 5.5 mm each 38.00
- Standard, 180 mm, 7", Ψ 5 mm, tip 6.5 mm wide, 16.00
- Weir, 190 mm, 7 1/2", 106.00
Needle holders and needle holder with scissors
Profiles for (TC) needle holders are available on request, also other than stated:
smooth, fine 0.2 mm, medium 0.4 mm or coarse 0.5 mm
- Adson, 175 mm, 7", fenestrated, 71.00
- Axhausen (TC), 185 mm, 7 1/4", coarse profile (0.5 mm), 109.00
- Baby-Crile-Wood (TC), 150 mm, 6", medium profile (0.4 mm), 53.00
- Baumgartner, 145 mm, 5 3/4", 38.00
- Baumgartner (TC), 145 mm, 5 3/4", coarse profile (0.5 mm), 53.00
- Boynton, 125 mm, 5", 83.00
- Castroviejo (TC), 145 mm, 5 3/4", smooth jaw, 156.00
- Castroviejo (TC), 145 mm, 5 3/4", fine profile (0.2 mm), 156.00
- Castroviejo (TC), 215 mm, 8 1/2", fine profile (0.2 mm), 179.00
- Crile, 150 mm, 6", 66.00
- Crile-Wood, 150 mm, 6", light pattern, 39.00
- Crile-Wood, 160 mm, 6 1/4", heavy pattern, 43.00
- Crile-Wood (TC), 145 mm, 5 3/4", medium profile (0.4 mm), 53.00
- Crile-Wood (TC), 180 mm, 7", medium profile (0.4 mm), 60.00
- Crile-Wood (TC), 200 mm, 8", medium profile (0.4 mm), 68.00
- Crile-Wood (TC), 305 mm, 12", medium profile (0.4 mm), 85.00
- Crile-Murray, 150 mm, 6", 39.00
- Converse, 125 mm 5", 43.00
- Converse (TC), 130 mm 5 1/8", fine profile (0.2 mm), 58.00
- DeBakey (TC), 165 mm, 6 1/2", very delicate, fine profile (0.2 mm), 80.00
- DeBakey (TC), 165 mm, 6 1/2", very delicate, medium profile (0.4 mm), 80.00
- DeBakey (TC), 210 mm, 8 1/4", very delicate, fine profile (0.2 mm), 92.00
- DeBakey (TC), 210 mm, 8 1/4", very delicate, medium profile (0.4 mm), 92.00
- DeBakey (TC), 150 mm, 6", medium profile (0.4 mm), 50.00
- DeBakey (TC), 180 mm, 7", medium profile (0.4 mm), 53.00
- DeBakey (TC), 230 mm, 9", medium profile (0.4 mm), 63.00
- DeBakey (TC), 250 mm, 10", medium profile (0.4 mm), 69.00
- DeBakey (TC), 305 mm, 12", medium profile (0.4 mm), 76.00
- DeBakey (TC), 305 mm, 12", slender pattern, medium profile (0.4 mm), 85.00
- DeBakey (TC), 195 mm, 7 3/4", 1 extended handle/curved rings, m.profile (0.4 mm), 105.00
- DeBakey (TC), 245 mm, 9 3/4", 1 extended handle/curved rings, m.profile (0.4 mm), 120.00
- Derf, 125 mm 5", 38.00
- Derf (TC), 115 mm, 4 1/4", medium profile (0.4 mm), 65.00
- Doyen, 125 mm 5", 49.00
- Finochietto (TC), 265 mm, 10 1/2", flexed, coarse profile (0.5 mm), 89.00
- Gillies, with scissors, 150 mm, 6", small smooth jaw, flexed, 86.00
- Gillies, with scissors, 160 mm, 6 1/4", flexed, 68.00
- Gillies (TC), with scissors, 160 mm, 6 1/4", flexed, medium profile (0.4 mm), 101.00
- Halsey, 130 mm, 5 1/8", smooth jaw, 40.00
- Halsey, 130 mm, 5 1/8", 37.00
- Halsey (TC), 120 mm, 4 3/4", smooth jaw, 68.00
- Halsey (TC), 130 mm, 5 1/8", fine profile (0.2 mm), 37.00
- Heaney (Hegar), 200 mm, 8", curved, 60.00
- Heaney (TC), 200 mm, 8", curved, coarse profile (0.5 mm), 89.00
- Heaney (TC), 260 mm, 10 1/4", curved, coarse profile (0.5 mm), 105.00
- Hegar (TC), 205 mm, 8", heavy pattern, coarse profile (0.5 mm), 60.00
- Hegar (TC), 245 mm, 9 3/4", heavy pattern, coarse profile (0.5 mm), 71.00
- Hegar-Mayo (TC), 150 mm, 6", coarse profile (0.5 mm), 47.00
- Hegar-Mayo (TC), 180 mm, 7", coarse profile (0.5 mm), 50.00
- Hegar-Mayo (TC), 205 mm, 8", coarse profile (0.5 mm), 53.00
- Hegar-Mayo (TC), 300 mm, 12", coarse profile (0.5 mm), 85.00
- Hegar-Mayo-Seeley (TC), 200 mm, 8", medium profile (0.4 mm), 61.00
- Hegar-Olsen, with scissors, 140 mm, 5 1/2", 58.00
- Hegar-Olsen (TC), with scissors, 145 mm, 5 3/4", medium profile (0.4 mm), 93.00
- Hegar-Olsen (TC), with scissors, 165 mm, 6 1/2", medium profile (0.4 mm), 70.00
- Hegar-Olsen, with scissors, 185 mm, 7 1/4", 62.00
- Hφsel (TC), 205 mm, 8", coarse profile (0.5 mm), 128.00
- Hφsel (TC), 260 mm, 10 1/4", coarse profile (0.5 mm), 158.00
- Hφsel (TC), 260 mm, 10 1/4", coarse profile (0.5 mm), long neck, 158.00
- Jameson, 230 mm, 9", 62.00
- Julian (TC), 200 mm, 8", curved, medium profile (0.4 mm), 85.00
- Kilner, 135 mm, 5 1/4", 37.00
- Kilner, 165 mm, 6 1/2", 40.00
- Kilner (TC), 135 mm, 5 1/4", coarse profile (0.5 mm), 69.00
- Langenbeck (TC), 180 mm, 7", coarse profile (0.5 mm), 81.00
- Langenbeck (TC), 200 mm, 8", coarse profile (0.5 mm), 87.00
- Langenbeck (TC), 200 mm, 8", delicate pattern, medium profile (0.4 mm), 93.00
- Lawrance, 150 mm, 6", fine jaw, 31.00
- Lichtenberg (TC), 195 mm, 7 3/4", elastic pattern, coarse profile (0.5 mm), 107.00
- Masing (TC), 130 mm, 5 1/8", one ring flexed, medium profile (0.4 mm), 63.00
- Masson, 265 mm, 10 1/2", 59.00
- Masson (TC), 265 mm, 10 1/2", coarse profile (0.5 mm), 83.00
- Masson-Luethy, 255 mm, 10", bayonet shape, 86.00
- Mathieu, 140 mm, 5 1/2", 48.00
- Mathieu, 170 mm, 6 3/4", 55.00
- Mathieu, 200 mm, 8", 61.00
- Mathieu (TC), 140 mm, 5 1/2", coarse profile (0.5 mm), 69.00
- Mathieu (TC), 170 mm, 6 3/4", coarse profile (0.5 mm), 77.00
- Mathieu (TC), 200 mm, 8", coarse profile (0.5 mm), 81.00
- Mathieu (TC), 140 mm, 5 1/2", delicate pattern, medium profile (0.4 mm), 71.00
- Mathieu (TC), 170 mm, 6 3/4", delicate pattern, medium profile (0.4 mm), 79.00
- Mathieu (TC), 200 mm, 8", delicate pattern, medium profile (0.4 mm), 82.00
- Mathieu (TC), 200 mm, 8", heavy pattern, coarse profile (0.5 mm), 81.00
- Mathieu (TC), 245 mm, 9 3/4", heavy pattern, coarse profile (0.5 mm), 108.00
- Mathieu-Stille, 175 mm, 7", very heavy pattern, 92.00
- Mathieu-Stille, 200 mm, 8", very heavy pattern, 99.00
- Mayo-Hegar, 165 mm, 6 1/2", 35.00
- Mayo-Hegar, 190 mm, 7 1/2", 39.00
- Mayo-Hegar, 150 mm 6", with groove, medium profile, 23.00
- Mayo-Hegar, 180 mm 7", with groove, medium profile, 25.00
- Mayo-Hegar, 200 mm 8", with groove, medium profile, 28.00
- Mayo-Hegar, 150 mm 6", with groove, heavy pattern 43.00
- Mayo-Hegar, 180 mm 7", with groove, heavy pattern 44.00
- Mayo-Hegar, 200 mm 8", with groove, heavy pattern 46.00
- Mayo-Hegar, 200 mm 8", without groove, heavy pattern 45.00
- Mayo-Hegar (TC), 160 mm, 6 1/4", light pattern, coarse profile, 49.00
- Mayo-Hegar (TC), 185 mm, 7 1/4", light pattern, coarse profile, 52.00
- Mayo-Hegar (TC), 205 mm, 8", light pattern, coarse profile, 55.00
- Mayo-Hegar (TC), 240 mm, 9 1/2", light pattern, coarse profile, 70.00
- Mayo-Hegar (TC), 270 mm, 10 3/4", light pattern, coarse profile, 78.00
- Mayo-Hegar (TC), 160 mm, 6 1/4", heavy pattern, coarse profile, 49.00
- Mayo-Hegar (TC), 185 mm, 7 1/4", heavy pattern, coarse profile, 52.00
- Mayo-Hegar (TC), 205 mm, 8", heavy pattern, coarse profile, 55.00
- Mayo-Hegar (TC), 240 mm, 9 1/2", heavy pattern, coarse profile, 70.00
- Mayo-Hegar (TC), 270 mm, 10 3/4", heavy pattern, coarse profile, 78.00
- Mayo-Hegar (TC), 305 mm, 12", heavy pattern, coarse profile, 104.00
- Mayo-Hegar (TC), 370 mm, 14 1/2", heavy pattern, coarse profile, 149.00
- Mόller (TC), with scissors, ergonomic handle, 175 mm, 7", medium profile (0.4 mm), 108.00
- Mόller (TC), 360 mm, 14 1/4", curved, coarse profile (0.5 mm), 343.00
- Naunton-Morgan, 255 mm, 10", 145.00
- Naunton-Morgan (TC), 260 mm, 10 1/4", coarse profile (0.5 mm), 150.00
- Ryder (TC), 150 mm, 6", narrow smooth jaw, 76.00
- Ryder (TC), 180 mm, 7", narrow smooth jaw, 85.00
- Ryder (TC), 230 mm, 9", narrow smooth jaw, 94.00
- Ryder (TC), 135 mm, 5 1/4", narrow jaw, fine profile (0.2 mm), 81.00
- Ryder (TC), 155 mm, 6", narrow jaw, fine profile (0.2 mm), 86.00
- Ryder (TC), 175 mm, 7", narrow jaw, fine profile (0.2 mm), 91.00
- Ryder (TC), 210 mm, 8 1/4", narrow jaw, fine profile (0.2 mm), 96.00
- Ryder (TC), 135 mm, 5 1/4", narrow jaw, medium profile (0.4 mm), 74.00
- Ryder (TC), 155 mm, 6", narrow jaw, medium profile (0.4 mm), 78.00
- Ryder (TC), 195 mm, 7 3/4", narrow jaw, medium profile (0.4 mm), 84.00
- Ryder (TC), 265 mm, 10 1/2", narrow jaw, medium profile (0.4 mm), 106.00
- Sarot (TC), 175 mm, 7", medium profile (0.4 mm), 68.00
- Sarot (TC), 260 mm, 10 1/4", medium profile (0.4 mm), 89.00
- Senning, 170 mm, 6 3/4", 75.00
- Standard (TC), for sternum suture, 175 mm, 7", 79.00
- Standard (TC), 180 mm, 7", very delicate, fine profile (0.2 mm), 71.00
- Standard (TC), 200 mm, 8", very delicate, fine profile (0.2 mm), 74.00
- Standard (TC), 230 mm, 9", very delicate, fine profile (0.2 mm), 78.00
- Standard (TC), 180 mm, 7", with ratchet, 156.00
- Standard (TC), 215 mm, 8 1/2", s-shape, coarse profile (0.5 mm), 121.00
- Standard (TC), 275 mm, 10 3/4", jaw bayont shaped, coarse profile (0.5 mm), 103.00
- Standard (TC), 200 mm, 8", narrow jaw, medium profile (0.4 mm), 106.00
- Standard (TC) with scissors, 125 mm, smooth jaw, 93.00
- Stratte (TC), 210 mm, 8 1/4", curved, coarse profile (0.5 mm), 121.00
- Stratte (TC), 230 mm, 9", curved, coarse profile (0.5 mm), 123.00
- Toennis, 180 mm, 7", elastic pattern, 72.00
- Toennis (TC), 180 mm, 7", elastic pattern, coarse profile (0.5 mm), 92.00
- Toennis (TC), 180 mm, 7", elastic pattern, coarse profile (0.5 mm), sharp tip, 98.00
- Wachtel (TC), 170 mm, 6 3/4", medium profile (0.4mm), 151.00
- Wangensteen, 275 mm, 10 3/4", 65.00
- Wangensteen (TC), 275 mm, 10 3/4", coarse profile(0.5 mm), 84.00
- Webster, 125 mm 5", smooth jaw, 37.00
- Webster (TC), 125 mm 5", smooth jaw, 64.00
- Webster (TC), 125 mm 5", medium profile (0.4 mm), 64.00
- Wertheim (TC), 200 mm, 8", smooth jaw (0.5 mm), 81.00
- Wertheim (TC), 240 mm, 9 1/2", coarse profile (0.5 mm), 91.00
- Wertheim (TC), 300 mm, 12", coarse profile (0.5 mm), 118.00
- Zweifel (TC), 200 mm, 8", coarse profile (0.5 mm), 164.00
- Zweifel (TC), 200 mm, 8", heavy pattern, coarse profile (0.5 mm), 170.00
- Zweifel (TC), 230 mm, 9", coarse profile (0.5 mm), 177.00
- see also under
- boomerang-
- eye-
- guide-
- intestinal-
- ligature-
- micro-
- microscopic-
- post mortem-
- pudendus block-
- Reverdin-
- sternal puncture-
- surgical-
- wire suture-
Nerve approximator see under Approximators
Nerve dissecting scissors
- Standard, 140 mm, 5 1/2", large ring handle, curved, 72.00
- Standard, 150 mm, 6", curved, 37.00
Nerve hooks
- Adson, 190 mm, 7 1/2", blunt, 32.00
- Adson, 190 mm, 7 1/2", sharp, 33.00
- Crile, 200 mm, 8", 25.00
- Cushing, 190 mm, 7 1/2", button tip, small, 31.00
- Cushing, 190 mm, 7 1/2", button tip, large, 31.00
- Cushing, 280 mm, 11", button tip, 36.00
- Grant Massie, 320 mm, 12 3/4", double ended, flexed/curved, 61.00
- Krayenbόhl, 185 mm, 7 1/4", small, smooth, 46.00
- Krayenbόhl, 185 mm, 7 1/4", large, smooth, 46.00
- Krayenbόhl, 185 mm, 7 1/4", small, button tip, 47.00
- Krayenbόhl, 185 mm, 7 1/4", large, button tip, 47.00
Nerve root retractors
- O'Connell, 220 mm, 8 3/4", double ended, 59.00
Nurse's scissors
- Standard, 145 mm, 5 3/4", 11.00
| A | B | C | D | E | F | G | H | I | J | K | L | M |
| N | O | P | Q | R | S | T | U | V | W | X | Y | Z |